From: James MacDonald (j4m3sm63@yahoo.ca)
Date: Sun Jan 25 2009 - 02:13:46 ARST
hah ... i bet that programmer got fired for talking too much and making the IOS code too large too :)
------------------------------
Jim MacDonald
j4m3sm63@yahoo.ca
------------------------------
________________________________
From: ccie girl <ccieangel@googlemail.com>
To: Cisco certification <ccielab@groupstudy.com>
Sent: Saturday, January 24, 2009 5:40:52 PM
Subject: Why can't all error messages..
be like this!
R4(config-if)#ip rsvp bandwidth 64000 128000
RSVP bandwidth (which is the bandwidth for the IP
headers and data inside them, but not the required
link layer headers) exceeds 75% of interface bandwidth.
It may be that you need to enter the 'bandwidth'
command to correct the system's understanding of the
available bandwidth. If that's not the case, then:
Due to bit-stuffing, layer 2 headers and layer 1
framing, and the need for routing and keep-alive
traffic, not to mention the RSVP messages themselves,
this is just plain too high. Configure your interface
realistically for the bandwidth available.
R4(config-if)#
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST