From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Sat Jan 17 2009 - 08:39:55 ARST
Well 1 thing to remember ( u must have noticed )
for D EX routes .... u change it for all or for none .....
unlike internal routes where u can chnage AD based on source of routes as
well
Thnx
Gaurav Madan
On Sat, Jan 17, 2009 at 3:39 PM, Roger RPF <rpf@bluemail.ch> wrote:
> Hi "ZZ" :o)
>
> As far as I can see, the route you are looking for is an external eigrp
> route (redistributed) or something else because the AD is 170.
>
> So, your command
>
> distance 71 145.1.37.7 0.0.0.0 33
>
> is only for INTERNAL eigrp routes!!
> If you want to change the distance for external routes, use the command
>
> distance eigrp <internal> <external>
>
> regards
>
> Roger
>
>
> -----Urspr|ngliche Nachricht-----
> Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag von
> ZZ
> Gesendet: Samstag, 17. Januar 2009 10:33
> An: Cisco certification
> Betreff: change AD under eigrp
>
> Hi experts,
>
>
> I'm hardly trying to change Administrative Distance for all/specific routes
> coming for specific neighbot under eigrp and no success. Is there any
> caveat ?
>
> R3 f0/0 145.1.37.3 <----------------145.1.37.7> f0/3 SW1
>
> router eigrp 100
> network 145.1.37.3 0.0.0.0
> distance 71 145.1.37.7 0.0.0.0 33
>
>
> here is the detail
>
> R3#sh ip ro 150.1.7.0 | i dista |entry
> Routing entry for 150.1.7.0/24
> R3#sh ip ro 150.1.7.0 | i dista |from
> Last update from 145.1.37.7 on FastEthernet0/0, 00:05:02 ago
> * 145.1.37.7, from 145.1.37.7, 00:05:02 ago, via FastEthernet0/0
> R3#
> R3#
> R3#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> R3(config)#router eigrp 100
> R3(config-router)#no distance 71 145.1.37.7 0.0.0.0 33
> R3(config-router)# distance 71 145.1.37.7 0.0.0.0
> R3(config-router)#end
> R3#
> R3#
> 15:13:17: %SYS-5-CONFIG_I: Configured from console by console
> R3#
> R3#
> 15:13:24: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 145.1.37.7
> (FastEthernet0/0) is down: route configuration changed
> R3#
> 15:13:24: RT: delete route to 150.1.7.0 via 145.1.37.7, eigrp metric
> [170/2560002816]
> 15:13:24: RT: no routes to 150.1.7.0
> 15:13:24: RT: NET-RED 150.1.7.0/24
> 15:13:24: RT: delete subnet route to 150.1.7.0/24
> 15:13:24: RT: NET-RED 150.1.7.0/24
> R3#
> R3#
> 15:13:28: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 145.1.37.7
> (FastEthernet0/0) is up: new adjacency
> R3#
> 15:13:30: RT: add 150.1.7.0/24 via 145.1.37.7, eigrp metric
> [170/2560002816]
> 15:13:30: RT: NET-RED 150.1.7.0/24
>
>
> Thanks in advance,
> ZZ
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:38 ARST