From: ZZ (zurabz@gmail.com)
Date: Sat Jan 17 2009 - 11:58:15 ARST
It's clear now. Thanks a lot to everybody!
On 1/17/09, GAURAV MADAN <gauravmadan1177@gmail.com> wrote:
> Well 1 thing to remember ( u must have noticed )
>
> for D EX routes .... u change it for all or for none .....
> unlike internal routes where u can chnage AD based on source of routes as
> well
>
> Thnx
> Gaurav Madan
>
> On Sat, Jan 17, 2009 at 3:39 PM, Roger RPF <rpf@bluemail.ch> wrote:
>
>> Hi "ZZ" :o)
>>
>> As far as I can see, the route you are looking for is an external eigrp
>> route (redistributed) or something else because the AD is 170.
>>
>> So, your command
>>
>> distance 71 145.1.37.7 0.0.0.0 33
>>
>> is only for INTERNAL eigrp routes!!
>> If you want to change the distance for external routes, use the command
>>
>> distance eigrp <internal> <external>
>>
>> regards
>>
>> Roger
>>
>>
>> -----Urspr|ngliche Nachricht-----
>> Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag von
>> ZZ
>> Gesendet: Samstag, 17. Januar 2009 10:33
>> An: Cisco certification
>> Betreff: change AD under eigrp
>>
>> Hi experts,
>>
>>
>> I'm hardly trying to change Administrative Distance for all/specific
>> routes
>> coming for specific neighbot under eigrp and no success. Is there any
>> caveat ?
>>
>> R3 f0/0 145.1.37.3 <----------------145.1.37.7> f0/3 SW1
>>
>> router eigrp 100
>> network 145.1.37.3 0.0.0.0
>> distance 71 145.1.37.7 0.0.0.0 33
>>
>>
>> here is the detail
>>
>> R3#sh ip ro 150.1.7.0 | i dista |entry
>> Routing entry for 150.1.7.0/24
>> R3#sh ip ro 150.1.7.0 | i dista |from
>> Last update from 145.1.37.7 on FastEthernet0/0, 00:05:02 ago
>> * 145.1.37.7, from 145.1.37.7, 00:05:02 ago, via FastEthernet0/0
>> R3#
>> R3#
>> R3#conf t
>> Enter configuration commands, one per line. End with CNTL/Z.
>> R3(config)#router eigrp 100
>> R3(config-router)#no distance 71 145.1.37.7 0.0.0.0 33
>> R3(config-router)# distance 71 145.1.37.7 0.0.0.0
>> R3(config-router)#end
>> R3#
>> R3#
>> 15:13:17: %SYS-5-CONFIG_I: Configured from console by console
>> R3#
>> R3#
>> 15:13:24: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 145.1.37.7
>> (FastEthernet0/0) is down: route configuration changed
>> R3#
>> 15:13:24: RT: delete route to 150.1.7.0 via 145.1.37.7, eigrp metric
>> [170/2560002816]
>> 15:13:24: RT: no routes to 150.1.7.0
>> 15:13:24: RT: NET-RED 150.1.7.0/24
>> 15:13:24: RT: delete subnet route to 150.1.7.0/24
>> 15:13:24: RT: NET-RED 150.1.7.0/24
>> R3#
>> R3#
>> 15:13:28: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 145.1.37.7
>> (FastEthernet0/0) is up: new adjacency
>> R3#
>> 15:13:30: RT: add 150.1.7.0/24 via 145.1.37.7, eigrp metric
>> [170/2560002816]
>> 15:13:30: RT: NET-RED 150.1.7.0/24
>>
>>
>> Thanks in advance,
>> ZZ
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
-- Sent from Gmail for mobile | mobile.google.comBlogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:38 ARST