From: Hobbs (deadheadblues@gmail.com)
Date: Thu Jan 15 2009 - 02:44:14 ARST
show us the IP addresses
On Wed, Jan 14, 2009 at 9:23 PM, sajid mavani <sajidmavani@gmail.com> wrote:
> Seniors,
>
>
> I was doing a lab & got stuck as I could not get reachibilty to my Backbone
> Routes (BB2 & BB3)
>
> In spite of knowing the complete practice Lab i could not complete it.
>
>
> Scenario.
>
> R6 --- Trunk to bb1 & bb2
>
> BB1 - vlan 10
> bb2 - vlan 20
>
> Configuration I did.
>
> R6
>
> Gig 0/1
> no ip address
> duplex full
> speed 100
>
> int gig0/1.1
> encapsulation dot1q 10
> ip add .X.X.X>X/24
>
> int gig0/1.2
> encapsulation dot1q 20
> ip add X.X.X>X/24
>
> the port Gig 0/1 is connected to Switch 2 -- Fas 0/6
>
> configuration
>
> int fas 0/6
> switch port trunk encapsulation dot1q
> switch port mode trunk
> switch port allowed vlan 10,20
>
> BB1& bb2 -- connected to SW2 & SW3 fas 0/0
>
> *SW2*
>
> conf t
>
> int fas 0/0
> switchport mode access
> switchport access vlan 10
>
> *SW3*
>
> int fas 0/0
> switchport mode access
> switch port access vlan 20
>
> Please guide me .. I fail to understand .. I have done this many times but
> some how this time It was not working.. I checked my configuration at least
> 10 times.
>
> Apart from that the trunk links were up between all the switches & ether
> channel was up .
>
> Later I released that the BB2 router CPU utilization reached 99% in no
> time..
>
> I don't have any other configuration saved.. But the configuration I have
> posted is the same that I have done while configuring.
>
> Senior please guide me, Thanks for all the support given so far.
>
> Awaiting your reply.
>
> Regards
>
> Sam
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:38 ARST