From: Wouter Prins (wp@null0.nl)
Date: Tue Jan 06 2009 - 18:18:23 ARST
Hi Hobbs,
You are probably missing a command like 'bridge 1 route ipv6', that doesnt
exist afaik. :)
I think it depends on the platform if it can bridge ipv6?
If all else fails tunnel it?
Regards,
Wouter
2009/1/6 Hobbs <deadheadblues@gmail.com>
> Hello,
>
> I have some issues running IPv6 on a bridged interface. For example
> ethernet0/0 is in bridge-group 1 (with an IPv4 address on the BVI). When I
> put an IPv6 address on the BVI I have no connectivity to other routers.
> When
> I put the IPv6 address on the Ethernet interface I have connectivity (ping,
> etc) but the interface does not accept routing updates via RIP. Once I take
> the bridge-group of the interface - RIP updates are accepted.
>
> Any ideas how to make IPv6 routing and Bridged interfaces work together?
>
> R2 -----e0/1 R1 e0/0 ------ R3
>
> So in other words R1 needs to bridge IPv4 between R3 and R2 (they are on
> the
> same IPv4 subnet)
> R1 and R3 also need to exchange IPv6 routes via RIPng.
>
> Thanks,
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:36 ARST