From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Mon Jan 05 2009 - 14:25:11 ARST
>it reads conf from router memory
By this do you mean that you've issued the 'parser config cache int'
command? It definitely speeds things up on physical routers (note: an
initial 'sh run' is required to cache the running-config to start with, so
the display is sped up on the second and all subsequent 'sh run' commands).
I just tried it in Dynamips and it did seem that I noticed a difference.
Mind you, though, I just had a default config and thus I think I shaved a
two-second delay to a one-second delay - could have just been wishful
thinking on my part...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Bogdan Sass
Sent: Monday, January 05, 2009 7:49 AM
To: Radioactive Frog
Cc: CCIE Lab
Subject: Re: Dynamips: show run - output time customization
Radioactive Frog wrote:
> I am testing dynamips on ubuntu hardy.
>
> I allocated 256 MB RAM to R1 instant but when I do show 'show run'
the
> output on the screen taking about 4-6 seconds (after typing command and
> press enter).
> Is there any way to reduce this time? it reads conf from router memory.
>
From what I recall, a real router does the same thing (it has a
noticeable delay when doing "show run"). So I doubt you will be able to
"solve" the problem... :)
> on the other when I do 'show conf' or 'show startup-confg it gives me the
> output instant.
>
> -frog
>
>
-- Bogdan Sass CCAI,CCSP,JNCIA-ER,CCIE #22221 (RS) Information Systems Security Professional "Curiosity was framed - ignorance killed the cat"Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:36 ARST