From: AKHILESH THAKUR (akhi_thakur@hotmail.com)
Date: Tue Dec 30 2008 - 03:06:17 ARST
Dear Hobbs,
Yes I am talking about dot1q tunneling. I wanted to knew that there would be
mac-learning of already tagged from customer on dot1q tunnel port.
Thanks Hobbs, I have understood that MAC would be learned on the tunneled
port.
Regards
Akhi> Date: Mon, 29 Dec 2008 11:42:05 -0700> From: deadheadblues@gmail.com>
To: akhi_thakur@hotmail.com> Subject: Re: MAC Learning on tunnel port> CC:
ccielab@groupstudy.com> > Are you talking about dot1q tunneling? I don't
understand it wouldn't be.> Here is a lab I have set up:> > SW2#show run int
f0/14> Building configuration...> > Current configuration : 191 bytes> !>
interface FastEthernet0/14> switchport access vlan 999> switchport mode
dot1q-tunnel> l2protocol-tunnel cdp> l2protocol-tunnel stp> no cdp enable>
end> > SW2#show mac address-ta | inc Fa0/14> 999 0000.0000.0003 DYNAMIC
Fa0/14> 999 0005.325a.4e81 DYNAMIC Fa0/14> 999 0019.e816.df10 DYNAMIC Fa0/14>
SW2#> > Not sure if this what you referring to. Let me know.> > > > On Mon,
Dec 29, 2008 at 2:42 AM, AKHILESH THAKUR <akhi_thakur@hotmail.com>wrote:> > >
DEAR GS,> > Is MAC learning supported on tunneled port. As far my
understanding it is> > not.> > Let me know ur thoughts on this.> > If it is
yes , explain how?> >> > Regards> > Akhilesh> >
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:10 ARST