From: Haroon (itguy.pro@gmail.com)
Date: Mon Dec 29 2008 - 21:39:38 ARST
Thanks Hobbs.
I was just looking at those documents.
It seems HWIC-1FE would be a better option but are bit expensive though, is
anybody selling HWIC-1FE, I need 4 or 5 pieces?
Thanks,
Haroon
On Mon, Dec 29, 2008 at 6:34 PM, Hobbs <deadheadblues@gmail.com> wrote:
> Hi,
>
>
> http://www.cisco.com/en/US/products/ps5854/products_relevant_interfaces_and_modules.html
>
>
> http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6_ps5853_Products_Data_Sheet.html
>
> I believe the switch module interfaces can be converted to routed ports
> with the "no switchport" command. Don't know if all the switch modules
> support it though. Otherwise take a look at the links above for HWIC-1FE.
>
> hth
>
> On Mon, Dec 29, 2008 at 3:51 PM, Haroon <itguy.pro@gmail.com> wrote:
>
>> Hello Experts,
>>
>> I have couple of 2811s and few 2821s. I need to add 2 additional
>> Fast-Ethernet interfaces on each of these routers, what is the best way to
>> go about doing that? Which module (part#?) would allow layer3 capability?
>>
>> I understand HWIC-4ESW would but isn't that a switch which doesn't really
>> do
>> routing on it self but forwards it to the host?
>>
>> Please help.
>>
>> Thanks,
>>
>> Haroon
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:10 ARST