From: Timothy Chin (Tim@1c-solutions.com)
Date: Fri Dec 26 2008 - 05:17:39 ARST
This would depend on R4's connection speed to Routers R3 and R4 because
of the delay factor.
Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Xiaobo Zhu
Sent: Friday, December 26, 2008 2:05 AM
To: Cisco certification
Subject: Redistribute issue
Hi,
take this scenario
R1---RIP-----R2
| |
OSPF EiGRP 1
| |
R3---EIGRP 1--R4
R1 has an loopback 0 with ip address 1.1.1.0/24, which is advertise to
R2
via RIP and advertised to R3 via OSPF.
As the digram shows, R2, R3 and R4 are in the same EIGRP domain.
The question is if R2 redistribute and R3 both redistribute 1.1.1.0 to
R4
with the same K value, which path will R4 take to reach the
1.1.1.0/24network.
Many thanks!
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:10 ARST