From: Jonny English (redkidneybeans@gmail.com)
Date: Tue Dec 23 2008 - 01:56:36 ARST
this command will suppress the flash updates when a normal scheduled update
matches or is less than the number of seconds configured.
the range is between 0-30 seconds. Do a show ip protocols and have a look if
you get the stuff in bold below
Router(config)#router rip
Router(config-router)#flash-update-threshold 10
Router#sh ip protocols
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 60 seconds, next due in 29 seconds
* Flash update is suppressed when next update due within 10 seconds*
Invalid after 360 seconds, hold down 360, flushed after 480
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
Ethernet0/0 2 2
Serial1/0.64 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
131.1.0.0
Routing Information Sources:
Gateway Distance Last Update
131.1.46.4 120 00:00:16
Distance: (default is 120)
On Tue, Dec 23, 2008 at 3:36 PM, ospfv2 <ospfv2@gmail.com> wrote:
> Hi Groups
>
> I'm trying to understand flash-update-threshold command,
>
> when putting flash-update-threshold 30 , i expect to see no flash
> update whenever changes occur (by shut and no sh my loopback
> interface).
>
> but the router is still sending flash update.
>
> am i missing something or is my lack of understanding of the command ?
>
> thanks in advance
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST