From: Sorin CONSTANTINESCU (consta@gmail.com)
Date: Mon Dec 22 2008 - 17:41:05 ARST
I use to stop/start the swiches in dynagen whenever i don't have arp
working. It's always a dynamips/dynagen bug :)
//Sorin
On Dec 22, 2008, at 20:42, Bogdan Sass <bogdan.sass@catc.ro> wrote:
> I've seen the same problem while working on my preparation. The
> switch also (usually) logs an error when bringing the interface up.
>
> Anyway, the best way I could find to deal with the problem was to
> reset the switch interface a couple of times (shut/no shut). As soon
> as the error message stopped showing up, the ping would generally
> work. Never took more than two or three tries :)
>
> Yes, I know this doesn't solve the underlying problem, but... it
> worked for me :)
>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>> Behalf Of
>> lovnish.sharma@bt.com
>> Sent: Monday, December 22, 2008 9:09 PM
>> To: j4m3sm63@yahoo.ca; ccielab@groupstudy.com
>> Subject: RE: IEWB Dynamips vol2 v4.1 lab 1 Task 1.1-No Switchport
>> config
>> query
>>
>> Jim,
>> Thanks for your reply.
>> Interfaces status at both the devices are in UP/UP.
>> Also I found very unusual problem that when I perform clear arp
>> then Router1
>> doesn't recieve the arp reply from switch1. However Switch 1
>> recieves ARP
>> request from Router 1 & sends reply ARP to router 1. But Router 1
>> never
>> receives ARP reply from SW1. PLease find below the output. Its very
>> simple
>> scenario however its not working.
>>
>
>
> --
> Bogdan Sass
> CCAI,CCSP,JNCIA-ER,CCIE #22221 (RS)
> Information Systems Security Professional
> "Curiosity was framed - ignorance killed the cat"
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST