RE: Narbik's IPV6 Lab2 from Adv. Workbook

From: Scott Morris (smorris@internetworkexpert.com)
Date: Wed Dec 17 2008 - 00:32:48 ARST

SW4(config)#ipv6 ?
  access-list Configure access lists
  general-prefix Configure a general IPv6 prefix
  hop-limit Configure hop count limit
  host Configure static hostnames
  icmp Configure ICMP parameters
  local Specify local options
  neighbor Neighbor
  route Configure static routes
  router Enable an IPV6 routing process
  source-route Process packets with source routing header options
  unicast-routing Enable unicast routing

SW4(config)#do sh ver | in .bin
System image file is "flash:/c3550-ipservicesk9-mz.122-44.SE3.bin"
SW4(config)#

HTH,

Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor

smorris@internetworkexpert.com

 

Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
 

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Narbik Kocharians
Sent: Tuesday, December 16, 2008 8:00 PM
To: Lucas Iglesias
Cc: sidd ant; ccielab@groupstudy.com
Subject: Re: Narbik's IPV6 Lab2 from Adv. Workbook

*I believe the IOS is 12.2(44)SE*

On Tue, Dec 16, 2008 at 4:56 PM, Lucas Iglesias
<lucas.iglesias@gmail.com>wrote:

> Hi,
>
> As far as I know, the 3550 can not run IPv6 (regardless of the IOS
> ver), only the 3560...
>
> --
> Luke Iglesias
> CCIE #22494
>
>
> On Tue, Dec 16, 2008 at 22:23, Narbik Kocharians <narbikk@gmail.com>wrote:
>
>> You can ignore SW1 and 3 or SW2 and 4s config. The best way to do
>> this is to upgrade your 3550 switches to the latest IOS, that will
>> have support for IPv6.
>>
>> On Tue, Dec 16, 2008 at 4:06 PM, sidd ant <aspiretobeccie@gmail.com>
>> wrote:
>>
>> > Hello Everyone,
>> >
>> > My home-lab has two 3550s and two 3560s . I got to lab 2 in the
>> > workbook from narbik and realised that we need to have 4 3560s are
>> > required for
>> me
>> > to
>> > able to use the command " sdm prefer dual-ipv4-and-ipv6 default"
>> command. I
>> > don`t think this command is present on IP services based image for
>> > the 3550.
>> >
>> >
>> > Have any of you using narbiks work book gotten around this? I did
>> > check
>> for
>> > a IOS version for the 3550s which will allow this. Any alternatives
>> > that you guys used?
>> >
>> >
>> > Cheers
>> > Sidd--
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > ___________________________________________________________________
>> > ____ Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>> --
>> Narbik Kocharians
>> CCSI#30832, CCIE# 12410 (R&S, SP, Security) www.MicronicsTraining.com
>> <http://www.micronicstraining.com/>
>> www.Net-Workbooks.com <http://www.net-workbooks.com/> Sr. Technical
>> Instructor
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _____________________________________________________________________
>> __ Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
> 

--
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security) www.MicronicsTraining.com
www.Net-Workbooks.com Sr. Technical Instructor

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST