From: Scott Morris (smorris@internetworkexpert.com)
Date: Tue Dec 16 2008 - 02:29:19 ARST
Change timers? Summarize?
Ask the proctor? :)
Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Edom
Sent: Monday, December 15, 2008 10:59 PM
To: Cisco certification
Subject: RIP minimize updates
hi,
scanerio is like below, R1 and R2 are running RIP in a and vlan network is
192.168.1.0/24. R2 and R3 are running ospf in seperate vlan and net is
10.1.1.0/24.
R1--------R2----------R3
If question ask to minimize update traffic on R2 what it means ? We can you
default passive and then no passive for interface that is connected with R1
but since R2-R3 are on different network and i will configure command
"network 192.168.1.0" so it will not send updates on other interface.
There could be other solution that send update as unicast but i need your
comments on it.
Regards
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:08 ARST