From: Piotr M (pitt2k@gmail.com)
Date: Sat Dec 06 2008 - 08:17:54 ARST
Hi Rameez,
The better way to do that IMO, is to use a trunk to the real switch or
install USB Network cards.
Something like this should work good
http://cgi.ebay.pl/ws/eBayISAPI.dll?ViewItem&item=170285122466
Before you buy it, check 7200emu site and ensure that model works fine
with dynamips.
Also, take a look at the following post
http://7200emu.hacki.at/viewtopic.php?t=5555
Regards,
Piotr
2008/12/6 ramiz sardar <ramiz_ch@hotmail.com>:
> Hi Everybody,I have two PCs one is having very good processor and ram but only
> one pci slot available to install ethernet card but i have an other PC with 4
> PCI slots plus one built-in ethernet port but low hardware specification. Can
> i somehow integrate both PCs in such a way that processor and ram will be used
> from first pc and ethernet port from second pc. Actually i have four switches
> and want to integrate with GNS or Dynagen to make full cisco lab.I would
> appreciate if someone provide me solution Best Regards,Rameez
> _________________________________________________________________
> Invite your mail contacts to join your friends list with Windows Live Spaces.
> It's easy!
> http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&m
> kt=en-us
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:07 ARST