From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Thu Nov 27 2008 - 16:11:17 ARST
Hi Group
I am aware of the fact that to gracefully bring down the core router running
OSPF ; we can use the "max-metric router-lsa ...." CLI ..
But on same time I read that "ip ospf shutdown" can be give at interface
level for same .
But somehow I dont find this in my routers .. Can someone confirm this :
R1(config-if)#int f0/0
R1(config-if)#ip ospf ?
<1-65535> Process ID
authentication Enable authentication
authentication-key Authentication password (key)
bfd Enable BFD on this interface
cost Interface cost
database-filter Filter OSPF LSA during synchronization and flooding
dead-interval Interval after which a neighbor is declared dead
demand-circuit OSPF demand circuit
flood-reduction OSPF Flood Reduction
hello-interval Time between HELLO packets
lls Link-local Signaling (LLS) support
message-digest-key Message digest authentication password (key)
mtu-ignore Ignores the MTU in DBD packets
network Network type
prefix-suppression OSPF prefix suppression
priority Router priority
resync-timeout Interval after which adjacency is reset if oob-resync
is
not started
retransmit-interval Time between retransmitting lost link state
advertisements
transmit-delay Link state transmit delay
Also I dont find following :
router ospf 10
shutdown
I read these from DOC cd as ways for graceful shutdown .. but couldnt find
present .. Plzz lemme know where I miss.
Thnx
Gaurav Madan
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:32 ARST