From: ron.wilkerson@gmail.com
Date: Wed Nov 26 2008 - 17:10:48 ARST
Turn on netflow. If this t1 is your internet connection, the inverse loads make sense.
Ron
-----Original Message-----
From: Haroon <itguy.pro@gmail.com>
Date: Wed, 26 Nov 2008 12:16:22
To: Cisco certification<ccielab@groupstudy.com>
Subject: high rxloads
Hello Experts,
What are some of the reasons for this output when you do show int:
SATL-RCore#show int s0/2/0
Serial0/2/0 is up, line protocol is up
Hardware is GT96K with integrated T1 CSU/DSU
Description: connected to Internet
Internet address is ip.address/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
* reliability 255/255, txload 29/255, rxload 175/255*
The reliability line in particular.... I've tried using nbar and ip
accounting to figure out where the traffic is coming from but have not been
successful so far.
Thanks,
Haroon
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:32 ARST