Re: PIM With FR BroadCast network not NBMA

From: Zealist Hammad (zealist@gmail.com)
Date: Tue Nov 18 2008 - 16:50:04 ARST

Hies Experts,

I was expecting a reply , I know this may be an old topic but I
couldnt find a guide on particularly this type of config,

To add more for senario R1 is hub with FR (broadcast nw) and I config
RP on R3 and join R3's Fastethernet an IGMP grp . also i m using
sparse mode.

regards,

On 11/18/08, Zealist Hammad <zealist@gmail.com> wrote:
> Hies,
>
> I have a scenario I config FR BroadCast network(config ip ospf network
> broadcast) and config multicasting then config RP over one of spokes
> also Join IGMP group on same router then
> topology is like R3-----R1 -----R4
>
> 1- if runing PIM sparse-mode do we need to config command at hub
> ip pim nbma-mode??
> 2- Same question for sparse-dense mode.
>
> If i make RP at Hub it works fine without nbma-mode command over sparse mode
> but if RP is also at spoke i dont get ping reply from other spokes.
>
> regards
>
>
> --
> zealist@gmail.com
> 

-- 
zealist@gmail.com

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST