From: mreiks (marakalas.molefe@gmail.com)
Date: Tue Nov 18 2008 - 15:02:11 ARST
Hi Sachin
Have you tried "default-information originate" under the ospf process? That
my help - try it.
On Tue, Nov 18, 2008 at 6:34 PM, Sachin D <networker.ccie@gmail.com> wrote:
> Hi
>
> Need help on the below redistribution problem
>
>
>
> _ _ _ _ _ _ _ _ _ _ _ _ _
> | | |
> | RIP | OSPF |
> | | |
> R1<------------>R|2<----------->R3
> | | |
> | | |
> | _ _ _ _ _ _ _ | _ _ _ _ _ _ _ |
>
>
>
> In the above topology
> R2 is connected to R1 and R3.
> R1 and R2 are running RIP,
> R2 and R3 are running OSPF
>
> R1 is sending only default route to R2 via RIP
>
> Hence R2 has only 1 route for RIP subnets
> R* 0.0.0.0/0 [120/1] via x.x.x.x, 00:00:03,
>
> But when I am redistributing RIP into OSPF this default route is not
> getting
> redistributed into OSPF i.e R3 is not learning this default route.
>
> On the vice versa if default is generated in OSPF i.e by R3 and
> redistributed in RIP on R2 default route is passed to R1 i.e R1 learns the
> default route.
>
> Is there any concept I am missing here ?
>
> Why the default route is not getting redistributed into OSPF from RIP ?
>
>
> Regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST