From: Anthony Sequeira (asequeira@internetworkexpert.com)
Date: Mon Nov 10 2008 - 00:22:12 ARST
Hi Atlanta IE!
So sorry if this post has been responded to already. I just wanted to
point out that you are going to run across this a bunch.
Many of the Command Reference commands are not yet written up in the
Config Guide.
A recent example I found was making the sequence numbers visible in system
messages.
Warmest regards,
Anthony J. Sequeira, CCIE #15626, CCSI #23251
Senior CCIE Instructor
asequeira@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344
----- Original Message -----
From: "Atlanta CCIE" <atlantaccie@gmail.com>
Sent: Sat, November 8, 2008 10:37
Subject:Relating Master Index to Configuration Guide
OK I have tried working through this a few times but for some reason every
now and then I will get stuck on a command that I won't be able to locate
under the configuration guides. Here is an example. IP Telnet Hidden command
says DIA-274. I looked through the whole Dial Technologies configuration
guide but didn't see this mentioned anywhere. I guess I am blind or my
process is not correct. Can someone guide me through the process on how to
locate configuration guide for a certain command under main index?
Thank you!
ip telnet hidden
DIA-274<http://www.cisco.com/en/US/docs/ios/dial/command/reference/dia_i1.html#wp1013234>
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST