From: Edouard Zorrilla (ezorrilla@tsf.com.pe)
Date: Sun Nov 09 2008 - 22:01:20 ARST
Thanks Sir, I have worked with CSM before I am very knowledge of protocols.
The issue is that the concept of context inside ACE is something new for me,
and I do not have enought time to training, that is why I was asking more
examples and topologies
Regards
----- Original Message -----
From: "Tony Varriale" <tvarriale@flamboyaninc.com>
To: "'amernas'" <taloust@gmail.com>; <ccielab@groupstudy.com>
Cc: <security@groupstudy.com>
Sent: Sunday, November 09, 2008 12:15 PM
Subject: RE: ACE Sample Configs
>I would hire a qualified partner to assist you and your web team with this.
> You not only need to understand ACE, network, apps, html, etc but you also
> need to understand what the web team is doing. It's not something someone
> can pick up in a month or 2.
>
> tv
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Edouard Zorrilla
> Sent: Sunday, November 09, 2008 6:29 AM
> To: Edouard Zorrilla; amernas; ccielab@groupstudy.com
> Cc: security@groupstudy.com
> Subject: Re: ACE Sample Configs
>
> Just to add, my company have bought two ace's along two chassis 6506 to
> perform a load balancing and I need to set them up, the issue is that I
> have
>
> never set up this before.
>
> Regards
>
> ----- Original Message -----
> From: "Edouard Zorrilla" <ezorrilla@tsf.com.pe>
> To: "amernas" <taloust@gmail.com>; <ccielab@groupstudy.com>
> Cc: <security@groupstudy.com>
> Sent: Sunday, November 09, 2008 7:17 AM
> Subject: Re: ACE Sample Configs
>
>
>>I am a kind of confusing regarding this, for instance the command : "
>>peer
>
>>ip address X.X.X.14 255.255.255.0"
>>
>> It means I do not need to enter any command on the peer context which is
>> working as a standby ? If so what do I need to enter on the peer context
>> ?. Would you please unicast me with the config on both contexts ?
>>
>> Thanks a lot for your patience,
>>
>> Regards
>>
>> ----- Original Message -----
>> From: "amernas" <taloust@gmail.com>
>> To: "'Edouard Zorrilla'" <ezorrilla@tsf.com.pe>; <ccielab@groupstudy.com>
>> Cc: <security@groupstudy.com>
>> Sent: Sunday, November 09, 2008 7:02 AM
>> Subject: RE: ACE Sample Configs
>>
>>
>> Here is an example of the configuration of the primay ACE with 2 contexts
>> RED-1 and BLUE-1
>>
>> ###################################
>> .
>> .
>> hostname ACE-PRIMARY
>> .
>> .
>> resource-class RED
>> limit-resource all minimum 45.00 maximum equal-to-min
>> resource-class BLUE
>> limit-resource all minimum 45.00 maximum equal-to-min
>> ..
>> ..
>> interface vlan 2
>> description MANAGEMENT INTERFACE
>> ip address X.X.X.13 255.255.255.0
>> peer ip address X.X.X.14 255.255.255.0
>> service-policy input ACE-MGMT-TRAFFIC
>> no shutdown
>>
>> ft interface vlan 52
>> description FAILOVER AND SYNC INTERFACE
>> ip address X.X.X.1 255.255.255.0
>> peer ip address X.X.X.2 255.255.255.0
>> no shutdown
>> .
>> .
>> context RED-1
>> description RED-1 CONTEXT
>> allocate-interface vlan 9
>> allocate-interface vlan 30-31
>> allocate-interface vlan 55
>> member RED
>>
>> context BLUE-1
>> description BLUE-1 CONTEXT
>> allocate-interface vlan 7
>> allocate-interface vlan 40-41
>> allocate-interface vlan 50
>> member BLUE
>> .
>> .
>> ft peer 1
>> heartbeat interval 1000
>> heartbeat count 10
>> ft-interface vlan 52
>>
>> ft group 1
>> peer 1
>> peer priority 90
>> associate-context ADMIN-CONTEXT
>> inservice
>>
>> ft group 2
>> peer 1
>> peer priority 90
>> associate-context RED-1
>> inservice
>>
>> ft group 3
>> peer 1
>> peer priority 90
>> associate-context BLUE-1
>> inservice
>>
>> ############################################
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>> Edouard Zorrilla
>> Sent: Saturday, November 08, 2008 11:54 PM
>> To: ccielab@groupstudy.com
>> Cc: security@groupstudy.com
>> Subject: ACE Sample Configs
>>
>>
>> Anyone who has more real examples how to set up a ACE (Application
>> Control
>> Engine) module ? I found this :
>>
>>
> http://www.cisco.com/en/US/products/ps6906/tsd_products_support_model_home.h
>> t
>> ml
>>
>> But I gues this is not enough since the examples do not show how to set
>> up
>> the standby module,
>>
>> Regards
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST