From: Marko Milivojevic (markom@markom.info)
Date: Mon Nov 03 2008 - 20:02:47 ARST
What IP address is PE trying to use to open the LDP session with CE?
Is there any way to manipulate this behaviour?
On Mon, Nov 3, 2008 at 21:20, <yungli2008@gmail.com> wrote:
> Hi experts
> I am working with Carrier support Carrier with mpls in my dynamip and I am
> facing this issue.
> can anyone help me?
>
> The problem is when I enable mpls in PE router's interface which is towards to
> CE router its says this message
> "Set CSC label distribution protocol to LDP for VRF VPN_A"
> and the ldp adjacency didn't up.
>
> PE router IOS is "c7200-k91p-mz.122-25.S9.bin" and
> CE router IOS is "c3640-jk9o3s-mz.124-16.bin"
>
> Rack1R1(config-if)#interface FastEthernet0/0
> Rack1R1(config-if)# ip vrf forwarding VPN_A
> Rack1R1(config-if)# ip address 150.1.15.1 255.255.255.0
> Rack1R1(config-if)# duplex full
> Rack1R1(config-if)# mpls label protocol ldp
> Rack1R1(config-if)# mpls ip
> 00:00:33: Set CSC label distribution protocol to LDP for VRF VPN_A
> Rack1R1(config-if)#
>
> Can anyone help me to figure out this problem?
>
> Advance thanks
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:28 ARST