CSC

From: yungli2008@gmail.com
Date: Mon Nov 03 2008 - 19:20:20 ARST

Next message: akberali.cisco@gmail.com: "MQC feature in QOS"
Previous message: Marko Milivojevic: "Re: Frame-Relay"
Next in thread: Marko Milivojevic: "Re: CSC"
Maybe reply: Marko Milivojevic: "Re: CSC"
Maybe reply: Shaughn Smith: "RE: CSC"
Maybe reply: yungli2008@gmail.com: "RE: CSC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi experts
I am working with Carrier support Carrier with mpls in my dynamip and I am
facing this issue.
can anyone help me?

The problem is when I enable mpls in PE router's interface which is towards to
CE router its says this message
"Set CSC label distribution protocol to LDP for VRF VPN_A"
and the ldp adjacency didn't up.

PE router IOS is "c7200-k91p-mz.122-25.S9.bin" and
CE router IOS is "c3640-jk9o3s-mz.124-16.bin"

Rack1R1(config-if)#interface FastEthernet0/0
Rack1R1(config-if)# ip vrf forwarding VPN_A
Rack1R1(config-if)# ip address 150.1.15.1 255.255.255.0
Rack1R1(config-if)# duplex full
Rack1R1(config-if)# mpls label protocol ldp
Rack1R1(config-if)# mpls ip
00:00:33: Set CSC label distribution protocol to LDP for VRF VPN_A
Rack1R1(config-if)#

Can anyone help me to figure out this problem?

Advance thanks

Blogs and organic groups at http://www.ccie.net

Next message: akberali.cisco@gmail.com: "MQC feature in QOS"
Previous message: Marko Milivojevic: "Re: Frame-Relay"
Next in thread: Marko Milivojevic: "Re: CSC"
Maybe reply: Marko Milivojevic: "Re: CSC"
Maybe reply: Shaughn Smith: "RE: CSC"
Maybe reply: yungli2008@gmail.com: "RE: CSC"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:28 ARST