Re: QoS Policy on Ether-Channel interface

From: shiran guez (shiranp3@gmail.com)
Date: Sun Nov 02 2008 - 19:21:56 ARST

For such cases where we need an outside help I would use the nice feature
called EEM Embedded Event Manager

you can create a macro and apply it to the interface you need based on the
events you are getting such as link status change see the bellow link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_46_se/configuration/guide/sweem.html

On Sun, Nov 2, 2008 at 8:50 PM, <rajeshcn79@gmail.com> wrote:

> Hi all,
>
> I have to set QoS policy on ether-channel interface, but as per the Config
> guide (Model is 3750) we can set policy on physical interface only, is
> there
> any way out.
>
> Requirement details:
> Etherchannel contains 3 links of 1 Gig, I have to reserve 1800Mbps (1800
> out of
> 3000) bandwidth for my high priority traffic. Even if one link fails I want
> this 1800Mbps to be reserved for the high priority traffic (ie 1800 out of
> 2000).
>
> If I reserve 600Mpbs on each physical interface it won't adjust to 900 per
> link
> when one of the link in etherchannel fails.
>
> Please let me know if there is a solution
>
> Regards,
> Rajesh C N
> CCIE#19609
> Hyderabad
> India
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Shiran Guez
MCSE CCNP NCE1 JNCIA-ER CCIE #20572
http://cciep3.blogspot.com
http://www.linkedin.com/in/cciep3

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:28 ARST