From: Leonardo Pimentel (leocpimentel@gmail.com)
Date: Thu Oct 23 2008 - 15:37:41 ARST
Hi Nouman
By default, you must force a shut/no shut on this port.
However, you can also configure "errdisable recovery" in order to
automatically try to recovery the link after X seconds or even if the
errdisable was caused by a specific cause (errdisable recovery cause
?). The default timeout interval is 300 seconds and, by default, the
timeout feature is disabled.
More details at:
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml
Best regards,
Leonardo Pimentel
CCIE# 19720
On Thu, Oct 23, 2008 at 3:13 PM, nouman abbasi <abbasi.nouman@gmail.com> wrote:
> Hi,
>
> The port on the switch went to error disable state and doesnt seems to get
> up again.
> Any clue to revert to make it up.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:22 ARST