ACL Outbound

From: Nitro Drops (nitrodrops@hotmail.com)
Date: Fri Oct 17 2008 - 05:06:18 ART

Next message: Mr Kwadwo Afari-Djan: "Re: From Mr Kwadwo Afari-Djan.."
Previous message: ZEESHAN SANAULLAH: "RE: AW: Cisco Documentation for Switches (3560 and 3550)"
Next in thread: Kim teu: "Re: ACL Outbound"
Maybe reply: Kim teu: "Re: ACL Outbound"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

R1 s1/1 10.10.10.1 >> 10.10.10.2 s1/1 - R2 - s1/2 20.20.20.2 >> 20.20.20.3
s1/2 R3

if i just want to allow ANY to telnet to R3 s1/2.

an acl "permit tcp any host 20.20.20.3 eq telnet" is created on R2.

How come if the ACL is applied in R2 s1/2 outbound, traffic will not be
hitting ACL?

ACL only works if it is applied on R2 s1/1 inbound.

Next message: Mr Kwadwo Afari-Djan: "Re: From Mr Kwadwo Afari-Djan.."
Previous message: ZEESHAN SANAULLAH: "RE: AW: Cisco Documentation for Switches (3560 and 3550)"
Next in thread: Kim teu: "Re: ACL Outbound"
Maybe reply: Kim teu: "Re: ACL Outbound"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:21 ARST