From: Hasse (eriksson.hans@gmail.com)
Date: Mon Oct 06 2008 - 13:17:37 ART
Could you use mst instances for this solution. And allowed Clan
Skickat frC%n min iPhone
6 okt 2008 kl. 01.40 skrev "S Malik" <ccie.09@gmail.com>:
> I am not sure if I got your question right. If both links are trunk
> and you
> want all the odd vlans passing through one interface and even vlans
> from the
> other interface then you may try to use "sw trunk forward vlans"
> command and
> permit vlans accordingly.
> In order to select one switch as primary for odd or even vlans, set
> its
> priority accordingly.
>
> On 10/5/08, nouman abbasi <abbasi.nouman@gmail.com> wrote:
>>
>> Hi,
>> I have trunk between SW1 && SW2 on ports fa 0/10 and fa 0/11 ;
>>
>> On SW1 how could I configure Odd Vlans on one ports and even Vlans
>> on other
>> ports
>>
>> ODD Vlans on fa 0/10
>> EVEN Vlans on fa 0/11
>>
>> Assuming I have :
>> Vlan 1, Vlan 10 , Vlan 11, Vlan 12, Vlan 13, Vlan 14, Vlan 15, Vlan
>> 16,
>> Vlan
>> 17
>>
>> Regards
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST