Re: virtual-template ping

From: Gary Duncanson (garyduncanson@btinternet.com)
Date: Mon Oct 06 2008 - 10:54:56 ART


Lloyd

I forgot the details but I think your right. I recall loopback is involved
somewhere.

Gary
  ----- Original Message -----
  From: Lloyd Ardoin
  To: Gary Duncanson ; kang lee
  Cc: Cisco certification
  Sent: Monday, October 06, 2008 2:24 PM
  Subject: RE: virtual-template ping

  Not sure if the only way to do that would be to add a lookback and then use
ip unnumbered under the virtual template interface.

   Lloyd V Ardoin

-----------------------------------------------------------------------------
-
  From: Gary Duncanson
  Sent: Mon 10/6/2008 7:47 AM
  To: kang lee
  Cc: Cisco certification
  Subject: Re: virtual-template ping

Kang

Frame Relay map to itself may help. Failing that its the loopback issue.
Check archives.

Regards
Gary
----- Original Message -----
From: "kang lee" <kanghlee@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Monday, October 06, 2008 5:31 AM
Subject: virtual-template ping

> GS,
> I am wondering if I can ping the virtual-template interface. R3<=>R5
>
> I can ping other interface fine but not the interface on the router.
> from R3
> ping 18.18.35.2
> success!!!!!
>
> from R5
> ping 18.18.35.1
> success!!!!
>
> from R3
> ping 18.18.35.1
> no success
>
> from R5
> ping 18.18.35.2
> no success
>
>
>
> R3#
> int virtual-template 1
> ip add 18.18.35.1 255.255.255.0
>
>
> R5#
> int virtual-tempate 1
> ip add 18.18.35.2 255.255.255.0
>
>
> other configuration omitted!
>
>
>
> is there any way i can configure to ping it?
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net



This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST