From: Roger RPF (rpf@bluemail.ch)
Date: Mon Oct 06 2008 - 03:23:22 ART
I don't know your underlaying topology or the requirements of the task, but
as far as I know, you cannot ping your IP with a virtual template. I
normally use a multilink interface in such a scenario:
interface multilink 1
ip address 18.18.35.3
!
interface virtual-template 1
ppp multilink group 1
With this config, you can ping the address
regards
Roger
-----Urspr|ngliche Nachricht-----
Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag von
kang lee
Gesendet: Montag, 6. Oktober 2008 06:31
An: Cisco certification
Betreff: virtual-template ping
GS,
I am wondering if I can ping the virtual-template interface. R3<=>R5
I can ping other interface fine but not the interface on the router.
from R3
ping 18.18.35.2
success!!!!!
from R5
ping 18.18.35.1
success!!!!
from R3
ping 18.18.35.1
no success
from R5
ping 18.18.35.2
no success
R3#
int virtual-template 1
ip add 18.18.35.1 255.255.255.0
R5#
int virtual-tempate 1
ip add 18.18.35.2 255.255.255.0
other configuration omitted!
is there any way i can configure to ping it?
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST