From: Osamah Shaheen (ShaheenO@maaden.com.sa)
Date: Mon Oct 06 2008 - 03:16:10 ART
As I know it is used in FR multipoint connection where the DR is in
place.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mark Stephanus Chandra
Sent: 2008-10-06 02:59
To: ccielab@groupstudy.com
Subject: Repost : IP NBMA MODE Question
From: Mark Stephanus Chandra [mailto:mark.chandra@gmail.com]
Sent: 05 Oktober 2008 13:42
To: 'ccielab@groupstudy.com'
Subject: IP NBMA MODE Question
Dear GS,
I'm coming on my lab 9 workbook, still confuse with multicast.
So The question is like this
Diagram :
http://s481.photobucket.com/albums/rr171/mark_chandra/?action=view&curre
nt=M
CASTQST.jpg
The IEWB Workbook told to test a multicast group 224.1.1.1 connection
from
VLAN 7 to R4 and R5.
So R4 and R5 ethernet is joining Group 224.1.1.1.
And the solustion also use ip PIM NBMA-MODE on R5 Serial frame-relay
connection.
The Question is, Why R3 connection to R1 and R2 doesn't have to use ip
pim
nbma-mode ?
Still confuse when to use Ip Pim NBMA-MOde,
Please need you guys help on this.
Thanks a lot
Best Regards,
Mark Stephanus Chandra
IT-Network
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST