From: L Pham (ccie17030@gmail.com)
Date: Sun Oct 05 2008 - 01:17:43 ART
I suspect this cause my (downstream) SUP1 to reset at times ???
No Connectivity downstream and I may have to travel to remote site
to reload the box.
A bigger question is how to identify the bad guy that spil l out the
bad packet ?!
--- Two Upstream 6500 boxes-----
R1#sh int g5/7
GigabitEthernet5/7 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is 0018.b984.0324 (bia 0018.b984.0324)
Description: *** VLAN 122 ***
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is LH
input flow-control is off, output flow-control is off
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input 02:17:26, output 00:00:58, output hang never
Last clearing of "show interface" counters 1y33w
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 6000 bits/sec, 8 packets/sec
1403722237 packets input, 302769648497 bytes, 0 no buffer
Received 36886663 broadcasts (2838260 multicasts)
0 runts, 17242483 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
2361645022 packets output, 1376111640367 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
R1#Connection to x.y.122.2 closed by foreign host.
R2#sh int g5/7
GigabitEthernet5/7 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is 0018.b984.0cdc (bia 0018.b984.0cdc)
Description: *** Connection to MTZ-CC-3.1 ***
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is LH
input flow-control is off, output flow-control is off
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input 03:05:39, output 00:00:34, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 7000 bits/sec, 9 packets/sec
48334654 packets input, 8637132670 bytes, 0 no buffer
Received 23917033 broadcasts (23445259 multicasts)
0 runts, 643546 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
788154933 packets output, 114681526263 bytes, 0 underruns
0 output errors, 0 collisions, 4 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
R2#
TIA,
Loc
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST