From: Joseph Brunner (joe@affirmedsystems.com)
Date: Wed Oct 01 2008 - 12:04:48 ART
Hey,
Did you enable guest mode under the ssid?
dot11 ssid ATLwStaff0001
authentication open
guest-mode
HTH,
Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Haroon
Sent: Wednesday, October 01, 2008 10:51 AM
To: Cisco certification
Subject: CISCO HWIC-AP-AG-A Configuration
Hello Group,
Could anybody please share configuration for Cisco HWIC-AP-AG-A card for
2811? I am trying to configure it(see config below) but I cannot see the
SSID under available wireless networks.
!
interface Dot11Radio0/1/0
no ip address
!
ssid ATLwStaff0001
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0
48.0 54.0
station-role root
!
interface Dot11Radio0/1/1
ip address 192.168.11.1 255.255.255.0
!
ssid ATLwStaff0001
!
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
!
Thanks,
Haroon
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:18 ARST