From: Hobbs (deadheadblues@gmail.com)
Date: Fri Sep 26 2008 - 11:06:01 ART
I don't know why but this is from the DocCD:
"Though visible in the command-line help string, the *control-plane* and *
interface* keywords are not supported, and the statistics shown in the
display should be ignored."
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12
.2_44_se/command/reference/cli2.html#wp1948343
On Fri, Sep 26, 2008 at 6:35 AM, Manuel Mindez Cano <
Manuel.Mendez@telindus.es> wrote:
> Hello!
>
> After a hard day reading regarding QoS on 3560 I can not find some document
> explaining why is not possible to see statistics information under the
> "show
> policy-map interface" command.
>
> Can anyone explain why? (Hardware architecture issue, maybe?)
>
> Regards and thanks.
>
>
> Manuel Mindez
> CCIE#20951
>
>
> Pd:
>
> Router#show policy-map interface fastEthernet 0/48
> FastEthernet0/48
>
> Service-policy input: multi
>
> Class-map: multi (match-any)
> 0 packets, 0 bytes
> 5 minute offered rate 0 bps, drop rate 0 bps
> Match: access-group 103
> 0 packets, 0 bytes
> 5 minute rate 0 bps
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:19 ART