From: Manuel Méndez Cano (Manuel.Mendez@telindus.es)
Date: Fri Sep 26 2008 - 11:18:41 ART
Thanks!!
Always the simple solution...
Manuel.
PD. I need a rest...
________________________________
De: Hobbs [mailto:deadheadblues@gmail.com]
Enviado el: viernes, 26 de septiembre de 2008 16:06
Para: Manuel Mindez Cano
CC: Cisco certification
Asunto: Re: show policy-map interface on 3560
I don't know why but this is from the DocCD:
"Though visible in the command-line help string, the control-plane and
interface keywords are not supported, and the statistics shown in the display
should be ignored."
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12
.2_44_se/command/reference/cli2.html#wp1948343
On Fri, Sep 26, 2008 at 6:35 AM, Manuel Mindez Cano
<Manuel.Mendez@telindus.es<mailto:Manuel.Mendez@telindus.es>> wrote:
Hello!
After a hard day reading regarding QoS on 3560 I can not find some document
explaining why is not possible to see statistics information under the "show
policy-map interface" command.
Can anyone explain why? (Hardware architecture issue, maybe?)
Regards and thanks.
Manuel Mindez
CCIE#20951
Pd:
Router#show policy-map interface fastEthernet 0/48
FastEthernet0/48
Service-policy input: multi
Class-map: multi (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group 103
0 packets, 0 bytes
5 minute rate 0 bps
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:19 ART