From: Hobbs (deadheadblues@gmail.com)
Date: Sun Sep 21 2008 - 17:59:57 ART
fyi. I reloaded, it was still there. After reload I removed it, and it went
away.
On Sun, Sep 21, 2008 at 2:39 PM, Hobbs <deadheadblues@gmail.com> wrote:
> Check this out, traffic-shape group 101 will not go away.
> What am I doing wrong?
>
> R7#show run int f0/0
> Building configuration...
>
> Current configuration : 155 bytes
> !
> interface FastEthernet0/0
> ip address 150.100.220.7 255.255.255.0
> duplex auto
> speed auto
> traffic-shape group 101 7000000 875000 0 1000
> end
>
> R7#
> R7#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> R7(config)#int f0/0
> *R7(config-if)#no traffic-shape group 101 7000000 875000 0 1000
> R7(config-if)#no traffic-shape group 101 *
> R7(config-if)#^Z
> R7#show run int f0/0
> Building configuration...
>
> Current configuration : 155 bytes
> !
> interface FastEthernet0/0
> ip address 150.100.220.7 255.255.255.0
> duplex auto
> speed auto
> traffic-shape group 101 7000000 875000 0 1000
> end
>
> I put this command on the wrong interface and I need to put MQC here, I
> cant put MQC because I cant remove the traffic-shape.
>
> thanks,
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:19 ART