Re: Can't remove traffic-shape group on Ethernet interface

From: Narbik Kocharians (narbikk@gmail.com)
Date: Sun Sep 21 2008 - 21:18:01 ART

Did you try default interface F0/0 command?

I configured it on my router and i was able to negate it.

On Sun, Sep 21, 2008 at 1:59 PM, Hobbs <deadheadblues@gmail.com> wrote:

> fyi. I reloaded, it was still there. After reload I removed it, and it went
> away.
>
> On Sun, Sep 21, 2008 at 2:39 PM, Hobbs <deadheadblues@gmail.com> wrote:
>
> > Check this out, traffic-shape group 101 will not go away.
> > What am I doing wrong?
> >
> > R7#show run int f0/0
> > Building configuration...
> >
> > Current configuration : 155 bytes
> > !
> > interface FastEthernet0/0
> > ip address 150.100.220.7 255.255.255.0
> > duplex auto
> > speed auto
> > traffic-shape group 101 7000000 875000 0 1000
> > end
> >
> > R7#
> > R7#conf t
> > Enter configuration commands, one per line. End with CNTL/Z.
> > R7(config)#int f0/0
> > *R7(config-if)#no traffic-shape group 101 7000000 875000 0 1000
> > R7(config-if)#no traffic-shape group 101 *
> > R7(config-if)#^Z
> > R7#show run int f0/0
> > Building configuration...
> >
> > Current configuration : 155 bytes
> > !
> > interface FastEthernet0/0
> > ip address 150.100.220.7 255.255.255.0
> > duplex auto
> > speed auto
> > traffic-shape group 101 7000000 875000 0 1000
> > end
> >
> > I put this command on the wrong interface and I need to put MQC here, I
> > cant put MQC because I cant remove the traffic-shape.
> >
> > thanks,
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining
www.Net-Workbooks.com
Sr. Technical Instructor

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:19 ART