From: Igor M. (imanassypov@rogers.com)
Date: Tue Sep 16 2008 - 14:38:34 ART
I normally go through L2/L3 diagrams in the IE and I do the minimum that I see required at the moment. Along the way I do the lab, and if I realize that one is missing - just go ahead and add it. That way, incrementally, but you still keep it to a minimum...
----------------------
I.M., M.Eng. P.Eng.
Network Architect
CI Investments
----------------------
--- On Tue, 9/16/08, Atlanta CCIE <atlantaccie@gmail.com> wrote:
From: Atlanta CCIE <atlantaccie@gmail.com>
Subject: Minimum VLAN Configuration
To: "Cisco certification" <ccielab@groupstudy.com>
Received: Tuesday, September 16, 2008, 1:30 PM
I am not sure about others but I have hard time trying to figure out the
minimum numbers of VLANs needed by looking at the diagram. What method do
you guys use to come up with this? I tried looking at the topology diagrams
but I always leave some vlans out that are not on the diagram but in the
IE's SG. Any help would be highly appreciated :D
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART