From: Chidd (dungchid@gmail.com)
Date: Sat Sep 13 2008 - 18:24:10 ART
You can use command:
ip sla 1 monitor
type {udp-echo} dest-ipaddr 224.1.1.1 dest-port 12345 source-ipaddr
10.1.37.7 control disable
ip sla schedule 1 start now life forever
HTT,
Chidd
----- Original Message -----
From: "Zealist Hammad" <zealist@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: 14 September, 2008 03:27
Subject: how to test Multicast config
> Hi Experts,
>
> I was doing IE tech labs for Multicasting. In which they test diff
> modes by config cmd
>
> SW1(config)#rtr 1
> SW1(config-rtr)#type udpEcho dest-ipaddr 224.1.1.1 dest-port 12345
> source-ipaddr 10.1.37.7 control disable
>
> Now on Dynagen I am using 3640 with switching module and that doesnt
> suupporting this rtr 1 cmd.
>
> I wana know if there is any other good method of testing Multicast
> except ip igmp join-grp cmd ?? or is there some way that i can use
> this cmd on Dynagen??
>
>
> regards
>
> Hammad
> --
> zealist@gmail.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART