From: Zealist Hammad (zealist@gmail.com)
Date: Sat Sep 13 2008 - 19:23:18 ART
Thanks Chidd and Fahad. Both methods are working .
Regards
On Sun, Sep 14, 2008 at 2:24 AM, Chidd <dungchid@gmail.com> wrote:
> You can use command:
>
> ip sla 1 monitor
> type {udp-echo} dest-ipaddr 224.1.1.1 dest-port 12345 source-ipaddr
> 10.1.37.7 control disable
> ip sla schedule 1 start now life forever
>
> HTT,
> Chidd
> ----- Original Message ----- From: "Zealist Hammad" <zealist@gmail.com>
> To: "Cisco certification" <ccielab@groupstudy.com>
> Sent: 14 September, 2008 03:27
> Subject: how to test Multicast config
>
>
>> Hi Experts,
>>
>> I was doing IE tech labs for Multicasting. In which they test diff
>> modes by config cmd
>>
>> SW1(config)#rtr 1
>> SW1(config-rtr)#type udpEcho dest-ipaddr 224.1.1.1 dest-port 12345
>> source-ipaddr 10.1.37.7 control disable
>>
>> Now on Dynagen I am using 3640 with switching module and that doesnt
>> suupporting this rtr 1 cmd.
>>
>> I wana know if there is any other good method of testing Multicast
>> except ip igmp join-grp cmd ?? or is there some way that i can use
>> this cmd on Dynagen??
>>
>>
>> regards
>>
>> Hammad
>> --
>> zealist@gmail.com
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>
>
-- zealist@gmail.comBlogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART