From: Scott Morris (smorris@internetworkexpert.com)
Date: Thu Sep 11 2008 - 20:49:26 ART
/2 would give you a little more than you need... 192 - 223 is a range of
32 numbers. (provided my non-caffeinated addition is working)
32 = 5 bits that we don't care about which means there are 3 we do care
about...
192/3 is the Class C's. 192/2 will include multicast and reserved ranges.
0/1 = Class A
128/2 = Class B
192/3 = Class C
224/4 = Multicast
240/4 = Reserved
HTH,
Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344
Online Community: Our milkshakes are better than yours.
CCIE Blog: Come by... Learn lots!
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ali
Mousawi
Sent: Thursday, September 11, 2008 6:52 PM
To: ccielab@groupstudy.com
Subject: Match Class C
Hello Folks,
I want to match all Class C subnets using a prefix list would the following
be valid:
ip prefix list CLASS_C permit 192.0.0.0/2 ge 24 le 24
Regards
Ali
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART