From: Osamah Shaheen (ShaheenO@maaden.com.sa)
Date: Thu Sep 11 2008 - 15:35:39 ART
I'm agree with you that DOC-CD MENTIONED THE DEFAULT PRIORITY IS 192but this configuration is not working with me, and the vendor of the lab answer as following:
----------------------------------------------
R1#show run | inc candidate
ip pim bsr-candidate Loopback0 0 192
ip pim rp-candidate Loopback0
R6#show run | inc candidate
ip pim bsr-candidate Loopback0 0 192
ip pim rp-candidate Loopback0 priority 192
----------------------------------
while my answer is:
R1#show run | inc candidate
ip pim bsr-candidate Loopback0 0 192
R6#show run | inc candidate
ip pim rp-candidate Loopback0 priority 192
still confuse!!!!!!!!!!
________________________________
From: nobody@groupstudy.com on behalf of GAURAV MADAN
Sent: Thu 11/09/2008 02:23 PM
To: Sadiq Yakasai
Cc: Osamah Shaheen; Igor M.; ccielab@groupstudy.com
Subject: Re: RP ANNOUNCEMENT
To me .. the priority you have configured looks fine as your task
asked for RFC standard .
Note The Cisco IOS implementation of PIM BSR uses the value 0 as the
default priority for candidate RPs and BSRs. This implementation
predates the draft-ietf-pim-sm-bsr IETF draft, the first IETF draft to
specify 192 as the default priority value. The Cisco IOS
implementation, thus, deviates from the IETF draft. To comply with the
default priority value specified in the draft, you must explicitly set
the priority value to 192.
PLease refer to Doc CD which says 192 is standard priority but Cisco
implemented default priority of 0 .
Thnx
Gaurav Madan.
On Thu, Sep 11, 2008 at 4:23 PM, Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
> What are the outputs for "show ip pim neig" and "show ip mroute" and sh run
> on all devices please?
>
>
> Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART