RE: RP ANNOUNCEMENT

From: Osamah Shaheen (ShaheenO@maaden.com.sa)
Date: Thu Sep 11 2008 - 02:21:02 ART

lo0 already configured with pim, is the priority is correct...!?

________________________________

From: Igor M. [mailto:imanassypov@rogers.com]
Sent: Thu 11/09/2008 04:49 AM
To: ccielab@groupstudy.com; Osamah Shaheen
Subject: Re: RP ANNOUNCEMENT

dont forget to include the loop 0 in pim process

----------------------
I.M., M.Eng. P.Eng.
Network Architect
CI Investments
----------------------

--- On Wed, 9/10/08, Osamah Shaheen <ShaheenO@maaden.com.sa> wrote:

        From: Osamah Shaheen <ShaheenO@maaden.com.sa>
        Subject: RP ANNOUNCEMENT
        To: ccielab@groupstudy.com
        Received: Wednesday, September 10, 2008, 6:57 PM
        
        
        Dear GS,
         
        IF I have asked to do the following task:
         
         
        You may not use Auto-RP or statically assign RPs.
        
        ? Configure R6 to announce itself as a candidate bootstrap router. Set its
        priority value to be the
        
        default value defined in RFC 5059.
        
        ? Configure R1 to announce itself as a candidate rendezvous point. The priority
        should be the same
        
        as for R6.
        
        My answer:
        
        R1#show run | inc candidate
        ip pim bsr-candidate Loopback0 0 192
        
        R6#show run | inc candidate
        
        ip pim rp-candidate Loopback0
         priority 192
        
        
        This is not work with me!!! any suggestion or explanaition for better
        understanding such situation.
        
         
        
        Thanks.
        
        Sam
        
        
        
        --------------------------------------------------------------------------------
        
        
        This message and any attachments are confidential and intended solely for the
        use of the individual or entity to whom they are addressed. If you are NOT the
        intended recipient you should not use, copy, disclose or place any reliance on
        this e-mail or its contents, and immediately notify the sender by return e-mail
        and delete all copies of this e-mail from your system.
        
        Statement and opinions expressed in this e-mail are those of the sender, and do
        not necessarily reflect MA'ADEN.
        
        postmaster@maaden.com.sa
        
        
        Blogs and organic groups at http://www.ccie.net
        
        _______________________________________________________________________
        Subscription
         information may be found at:
        http://www.groupstudy.com/list/CCIELab.html
        
        
        
        
        
        
        

--------------------------------------------------------------------------------

This message and any attachments are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are NOT the intended recipient you should not use, copy, disclose or place any reliance on this e-mail or its contents, and immediately notify the sender by return e-mail and delete all copies of this e-mail from your system.

Statement and opinions expressed in this e-mail are those of the sender, and do not necessarily reflect MA'ADEN.

postmaster@maaden.com.sa

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART