reverse route injection

From: Jacob Armitage (jacoba77@gmail.com)
Date: Wed Sep 10 2008 - 17:40:49 ART

• Next message: Brad Ellis: "RE: OT: Cisco vs. Nortel"
• Previous message: Hobbs: "Re: Lock and Key"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Experts,

I am trying to configure reverse route injection in conjunction with Crypto
high availability. However the route is not being inserted into the routing
process. This feature should inject those routes on the remote tunnel
endpoint.

Configuration:-

crypto isakmp policy 10

 authentication pre-share

crypto isakmp key cisco address 0.0.0.0 0.0.0.0

!

!

crypto ipsec transform-set MYTRANS esp-3des esp-sha-hmac

!

crypto map LAB2 10 ipsec-isakmp

 set peer 50.50.4.6

 set transform-set MYTRANS

 match address 120

 reverse-route static

interface FastEthernet0/0.4

 encapsulation dot1Q 4

 ip address 50.50.4.1 255.255.255.0

 no snmp trap link-status

 standby ip 50.50.4.14

 standby priority 101

 standby preempt

 standby name LAB2

 crypto map LAB2 redundancy LAB2 stateful

access-list 120 permit icmp host 50.50.6.5 host 192.168.0.6

Blogs and organic groups at http://www.ccie.net

• Next message: Brad Ellis: "RE: OT: Cisco vs. Nortel"
• Previous message: Hobbs: "Re: Lock and Key"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART