From: Antonio Soares (amsoares@netcabo.pt)
Date: Wed Sep 10 2008 - 11:33:50 ART
"Do not use the show policy-map interface privileged EXEC command to display
classification information for incoming traffic. The control-plane and
interface keywords are not supported, and the statistics shown in the
display should be ignored."
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/1
2.2_46_se/configuration/guide/swqos.html#wp1021811
You should use "show mls qos interface" to perform the verifications.
Regards,
Antonio Soares, CCIE #18473 (R&S)
amsoares@netcabo.pt
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Geert Nijs
Sent: quarta-feira, 10 de Setembro de 2008 13:59
To: ccielab@groupstudy.com
Subject: QOS and service-policy statistics on C3750
Hi group,
Is it normal that on a C3750 switch, the switch does not keep QOS and
service-policy statistics when applying a "service-policy input" on an
interface ?
I am sure there are hits, but i don't see them:
(running 12.2(35)SE2)
sh policy-map interface fa1/0/2
FastEthernet1/0/2
Service-policy input: IPPHONE
Class-map: VOICE (match-any)
0 packets, 0 bytes
offered rate 0 bps, drop rate 0 bps
Match: ip dscp ef (46)
0 packets, 0 bytes
rate 0 bps
Class-map: SIGNALING (match-any)
0 packets, 0 bytes
offered rate 0 bps, drop rate 0 bps
Match: ip dscp cs3 (24) af31 (26)
0 packets, 0 bytes
rate 0 bps
Class-map: VIDEO (match-any)
0 packets, 0 bytes
offered rate 0 bps, drop rate 0 bps
Match: access-group 180
0 packets, 0 bytes
rate 0 bps
Class-map: class-default (match-any)
0 packets, 0 bytes
offered rate 0 bps, drop rate 0 bps
Match: any
0 packets, 0 bytes
rate 0 bps
Geert
________________________________
disclaimer : http://webservices.simac.be/disclaimer.htm
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART