From: CCIE3000 (ccie3000@googlemail.com)
Date: Tue Sep 09 2008 - 14:22:26 ART
How about using an offset list ?
On Tue, Sep 2, 2008 at 7:42 AM, Vijay Kurraha <vijaykurraha@yahoo.com>wrote:
> Thanks Huan
>
>
>
> ----- Original Message ----
> From: Huan Pham <Huan.Pham@peopletelecom.com.au>
> To: Vijay Kurraha <vijaykurraha@yahoo.com>; Ibrahim kabir <
> kebramccie@live.com>; ccielab@groupstudy.com
> Sent: Tuesday, September 2, 2008 12:24:28 AM
> Subject: RE: Route filter in EIGRP
>
>
> Vijay,
>
> Changing metric for the interfaces SHOULD WORK!
>
> EIGRP uses the minimum bandwidth of the path as one of the metrics (BW).
> Bumping up the BW for Serial0/0 will not actually doing you any good. If
> you check the show ip ei topo for the route, you still see minimum
> bandwidth metric the same (128K) for the path via Serial0/0.
>
> Instead, you should deacrease bandwidth of E0/0 to let say 56K.
> Alternatively, you can give Serial0/0 a very high delay.
>
> Another option is to use Offset list. E.g.
>
>
> access-list 99 permit 192.10.1.0 0.0.0.255
> router eigrp 100
> offset-list 99 in 30000000 Ethernet0/0
>
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Vijay Kurraha
> Sent: Tuesday, 2 September 2008 1:57 PM
> To: Ibrahim kabir; ccielab@groupstudy.com
> Subject: Re: Route filter in EIGRP
>
> Still same thing
>
> Rack1R1(config-if)#do sh int s0/0
> Serial0/0 is up, line protocol is up
> Hardware is QUICC Serial
> Internet address is 183.1.123.1/24
> MTU 1500 bytes, BW 10000000 Kbit, DLY 20000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation FRAME-RELAY, loopback not set
> Keepalive set (10 sec)
> LMI enq sent 1052, LMI stat recvd 1052, LMI upd recvd 0, DTE LMI up
> LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
> LMI DLCI 1023 LMI type is CISCO frame relay DTE
> FR SVC disabled, LAPF state down
>
> Rack1R1(config-if)#do sh ip ro 192.10.1.0 Routing entry for
> 192.10.1.0/24
> Known via "eigrp 100", distance 170, metric 309760, type external
> Redistributing via eigrp 100
> Last update from 183.1.17.7 on Ethernet0/0, 00:01:12 ago
> Routing Descriptor Blocks:
> * 183.1.17.7, from 183.1.17.7, 00:01:12 ago, via Ethernet0/0
> Route metric is 309760, traffic share count is 1
> Total delay is 2100 microseconds, minimum bandwidth is 10000 Kbit
> Reliability 255/255, minimum MTU 1500 bytes
> Loading 1/255, Hops 2
>
>
>
> ----- Original Message ----
> From: Ibrahim kabir <kebramccie@live.com>
> To: Vijay Kurraha <vijaykurraha@yahoo.com>; ccielab@groupstudy.com
> Sent: Monday, September 1, 2008 11:43:15 PM
> Subject: RE: Route filter in EIGRP
>
>
> I would say change the metric values of the interfaces. I.e by giving ur
> preferred link a better bandwidth value than ur currently used link.
>
>
> HTH,
>
> Kabir
>
>
>
> ________________________________
> Invite your mail contacts to join your friends list with Windows Live
> Spaces. It's easy! Try it!
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART