Re: Maximum Prefix Warning

From: Narbik Kocharians (narbikk@gmail.com)
Date: Sat Sep 06 2008 - 13:11:36 ART

In your configuration you are setting a maximum of 100 prefixes that can be
redistributed into your OSPF process. you will get your first message when
80 percent of that threshold is reached (80 Prefixes) and the second warning
message when the maximum number is reached (100 Prefixes), but because you
used the "*warning-only*" keyword at the end of that command, you are NOT
restricting the number of redistributed prefixes to 100, whereas, if you
remove the "*warning-only*" you will be restricting the number of
redistributed prefixes to 100.

On Sat, Sep 6, 2008 at 6:48 AM, CCIE3000 <ccie3000@googlemail.com> wrote:

> Hi Guys,
>
> I'm just checking that I'm not missing anything and my understanding is
> correct.
>
> Do we achieve the same goal with the following OSPF commands?
> Anything to be careful with?
>
> redistribute maximum-prefix 100 80 warning-only ie when we get to 80% of
> 100 issue warning
>
> redistribute maximum-prefix 80 100 warning-only ie when we get to 100%
> of 80 issue warning
>
> Thanks,
> Si
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining
www.Net-Workbooks.com
Sr. Technical Instructor

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART