From: Amir.Tahir/Wateen/Lahore (Amir.Tahir@wateen.com)
Date: Thu Sep 04 2008 - 14:18:00 ART
Hi Ahmed,
If u need a sample configuration, that won't take too long...:-)
autostart = False
[localhost:7200]
[[3640]]
image = C:\Program Files\Dynamips\images\c3640-jk9o3s-mz.123-14.T7.image
ram = 128
disk0 = 0
disk1 = 0
ghostios = true
mmap = False // to save processor Cycles
idlepc = 0x60530890
[[Router R1]]
model = 3640
console = 2001
autostart = False
slot0 = NM-4E
slot1 = NM-4T
E0/0 = SW1 1
E0/1 = SW1 11
S1/0 = FRSW 1
If you would like to run Fast Ethernet card, you have to insert instead in slot0 instead of NM-4E.
I won't share IOS, That you have to arrange by yourself. If you need any additional help, Please feel free to ask
Regards
__________________
Amir Tahir
Assistant Manager
Network Operations - Metro
Engineering Division
WATEEN TELECOM
Mob: +92-322-4002647
Email: amir.tahir@wateen.com
Website: www.wateen.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ahmed Desouki
Sent: Thursday, September 04, 2008 1:25 PM
To: ccielab@groupstudy.com
Cc: ahmed.desouki@encegypt.com
Subject: how can i add 3600 family to the dyna mips
hi group
sorry! it is the first time i share and i begin to see my step twards the CCIE
and i need to know if i can use 3600 family and some modules on it speacily
fast ether module on it
if so how i could do it?
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART