From: Fahad Khan (fahad.khan@gmail.com)
Date: Wed Sep 03 2008 - 15:21:16 ART
Is the traffic between BSR-candidate and RP-candidate *dense*??*,* like in
auto-rp for groups 224.0.1.39 and 224.0.1.40. I dont think "ip pim
nbma-mode" has any thing to do with dense mode traffic. Any body if shed
light will be appreciated.
regards,
On 9/3/08, Scott Strobeck <scott@strobeck.net> wrote:
>
> Instead of a tunnel, you should be able to use 'ip pim nbma-mode' on the R1
> serial interface (assuming it's multipoint or physical).
> Fahad Khan wrote:
>
>> Dear experts,
>>
>> I have a hub an spoke topology over FR as R2-----R1------R3. I have
>> configured R2 as BSR and RP-candidate. In order to have group-rp mapping
>> on
>> R3, I just want to make sure that i would need a GRE tunnel in b/w R2 and
>> R3
>> and then mroute over that tunnel.right??..i have labbed it, its working
>> fine, but is there any alternative way to do the same??
>>
>> thanks and regards,
>>
>>
>>
>
-- Fahad KhanBlogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART