From: Huan Pham (Huan.Pham@peopletelecom.com.au)
Date: Tue Sep 02 2008 - 01:24:28 ART
Vijay,
Changing metric for the interfaces SHOULD WORK!
EIGRP uses the minimum bandwidth of the path as one of the metrics (BW).
Bumping up the BW for Serial0/0 will not actually doing you any good. If
you check the show ip ei topo for the route, you still see minimum
bandwidth metric the same (128K) for the path via Serial0/0.
Instead, you should deacrease bandwidth of E0/0 to let say 56K.
Alternatively, you can give Serial0/0 a very high delay.
Another option is to use Offset list. E.g.
access-list 99 permit 192.10.1.0 0.0.0.255
router eigrp 100
offset-list 99 in 30000000 Ethernet0/0
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Vijay Kurraha
Sent: Tuesday, 2 September 2008 1:57 PM
To: Ibrahim kabir; ccielab@groupstudy.com
Subject: Re: Route filter in EIGRP
Still same thing
Rack1R1(config-if)#do sh int s0/0
Serial0/0 is up, line protocol is up
Hardware is QUICC Serial
Internet address is 183.1.123.1/24
MTU 1500 bytes, BW 10000000 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
LMI enq sent 1052, LMI stat recvd 1052, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
FR SVC disabled, LAPF state down
Rack1R1(config-if)#do sh ip ro 192.10.1.0 Routing entry for
192.10.1.0/24
Known via "eigrp 100", distance 170, metric 309760, type external
Redistributing via eigrp 100
Last update from 183.1.17.7 on Ethernet0/0, 00:01:12 ago
Routing Descriptor Blocks:
* 183.1.17.7, from 183.1.17.7, 00:01:12 ago, via Ethernet0/0
Route metric is 309760, traffic share count is 1
Total delay is 2100 microseconds, minimum bandwidth is 10000 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 2
----- Original Message ----
From: Ibrahim kabir <kebramccie@live.com>
To: Vijay Kurraha <vijaykurraha@yahoo.com>; ccielab@groupstudy.com
Sent: Monday, September 1, 2008 11:43:15 PM
Subject: RE: Route filter in EIGRP
I would say change the metric values of the interfaces. I.e by giving ur
preferred link a better bandwidth value than ur currently used link.
HTH,
Kabir
________________________________
Invite your mail contacts to join your friends list with Windows Live
Spaces. It's easy! Try it!
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART