From: Osamah Shaheen (ShaheenO@maaden.com.sa)
Date: Mon Sep 01 2008 - 05:47:24 ART
Dear All,
I'm trying to stop feedback traffic by using tag with route-map but it
is not working ....
Any one who try lab2 and used tag to stop routing loop...I spent more
than two days only for this to understand all the technique here
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Fahad Khan
Sent: 2008-09-01 11:41
To: Julio Carrasco
Cc: ccielab@groupstudy.com
Subject: Re: IEWB Vol 2 lab 13 task 3.7, OSPF distance command
check this one as well,
distance 109 0.0.0.0 255.255.255.255 1
and then tell me the outcome.
On 8/29/08, Julio Carrasco <julio.carrasco@ya.com> wrote:
>
> Hello,
>
> I have issued the next commands:
> router ospf 1
> distance 109 150.1.1.1 0.0.0.0 1
> !
> access-list 1 permit 139.1.2.0
> access-list 1 permit 139.1.6.0
> access-list 1 permit 139.1.7.0
> access-list 1 permit 139.1.11.0
>
> But I still seeing the routes that configured on the
> access-list with distance 110. I hcecked the IEWB solution, and they
did
> the
> same but with an standard named ACL.
>
> Could any one help me to figure out why isn4t working the distance
command.
>
> Best regards,
> Julio Carrasco.
>
>
> Blogs and organic groups at http://www.ccie.net
>
>
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART