From: david@gotimmons.com
Date: Sat Aug 30 2008 - 14:54:07 ART
You might also check to see if the interface is in err-disabled status
Sent from my BlackBerry. wireless device
-----Original Message-----
From: "Tony Schaffran \(GS\)" <groupstudy@cconlinelabs.com>
Date: Sat, 30 Aug 2008 09:52:30
To: 'jenifer Dcosta'<jeniferdcosta@gmail.com>; 'Cisco certification'<ccielab@groupstudy.com>
Subject: RE: can anybody help
What is the model of switch and IOS version?
Has this GBIC link worked before or is this a new connection?
Have you tried to swap the fiber connections on one end?
Tony Schaffran
Sr. Network Consultant
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
jenifer Dcosta
Sent: Saturday, August 30, 2008 7:44 AM
To: Cisco certification
Subject: can anybody help
Hi Experts,
I m facing 1 issue with 1 of my access switches,my switch uplink ports are
gibic modules and i m not able to connect
to the core.i have changed the gbic modules but still it does'nt work and
also the fibre cable too.One of the strange thing is that when i remove
gbic module still the led glows orange and when i insert it again still it
remains same .Interface is up but the line protocol is down always.
Have any body face this issue before i have done the default interface also
but still it doesnt come up.I dont understand when there is no gbic moduls
inserted still the light glows orange
And when i m inserting in the next Gbic port the light doesnt even glows nor
orange nor green.it seems like the module is not inserted.Trunk
configurations are correct and also negotiations are also correct
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:33 ART